1～15 件を表示 ／ 全 24 件
You can measure the moisture content of copy paper and cardboard base paper.
You can measure the moisture content of copy paper and cardboard base paper. Additionally, the HK-300 series offers three models depending on the measurement target and application: HK-300-1 with grip sensor, HK-300-2 with conductive rubber sensor, and HK-300-3 with constant pressure sensor.
Moisture measurement of kraft paper, liner paper, and copy paper is possible.
Moisture measurement can be performed on craft paper, liner paper, and copy paper. Additionally, the HK-300 series offers three models depending on the measurement target and application: - HK-300-1 with grip sensor, - HK-300-2 with conductive rubber sensor, - HK-300-3 with constant pressure sensor.
This is a wood moisture meter that adopts the electrical resistance method, which has been widely used traditionally.
The moisture value displayed can be adjusted between -9.9% and +9.9% to match the management conditions, making it suitable for actual circumstances. The MT-700 is a widely used wood moisture meter that employs the electrical resistance method. Wood takes a considerable amount of time to dry. If processing or construction is done while the wood is still insufficiently dried, it can lead to warping or cracking later on. As seen in historical building examples, wood is an excellent material that can have a lifespan of several hundred years if proper construction methods and management are adhered to. It is particularly suitable for climates like ours, which are hot and humid, as the wood itself responds to changes in humidity, making it a "living material." Whether wood is utilized effectively or not depends on proper moisture management, which is essential.
Adopting a dual temperature sensor method to achieve high-precision moisture measurement.
The FD-800 adopts a dual temperature sensor method to achieve high-precision moisture measurement. In addition to measuring the environmental temperature in the drying chamber with a thermistor, it is equipped with a non-contact infrared thermometer to directly measure the sample temperature. While compensating for the shortcomings of the thermistor, it allows for the setting of optimal heating and drying conditions tailored to the sample characteristics.
Just by inserting needle-shaped sensors into the tatami mat or tatami base, moisture is displayed.
The HX-300 simply displays the moisture content (%) by inserting a needle-shaped sensor into the tatami surface or tatami base. It is believed that the occurrence of mites in tatami is largely influenced by the moisture condition of the tatami base and the temperature. Additionally, excessive moisture in the tatami base can lead to mold and decay. In recent years, various building materials, including rice straw mats, have been used for tatami bases. This device can measure the moisture content of tatami surfaces, rice straw mats, and tatami boards (wood-based building materials) where moisture management is required, particularly according to JIS and JAS standards.
This is a moisture meter that uses infrared heating and drying. It automatically checks the mass change due to drying and determines the end of the drying process, allowing for accurate measurements.
The drying section of the FD-720 is equipped with a newly developed high heat capacity (200W×2) medium wavelength infrared quartz heater. Additionally, it features a variety of measurement modes, including a "rapid drying mode," allowing measurements under drying conditions suitable for the drying characteristics of the test samples.
Small and portable concrete and mortar moisture meter. It features an auto power-off function to prevent unnecessary battery usage.
To prevent accidents caused by the detachment of mortar or tiles from concrete surfaces, the injection of epoxy resin and similar materials into the peeling areas has gained attention in recent years. If the moisture content of the concrete surface or mortar at the injection site is high, the expected adhesive strength cannot be achieved. Therefore, this device was developed based on the "Public-Private Joint Research on the Development of Repair and Renovation Technologies for Exterior Materials" by the Ministry of Construction's Building Research Institute for the purpose of measuring moisture in these areas.
It is a soil moisture meter with approximately 3 seconds measurement and built-in data logger function.
By directly inserting the sensor into the soil, measurements can be taken in approximately 3 seconds. With a built-in logger, it is also effective for measuring changes over time. The sensor switching function allows customers to adjust the sensor length. The lightweight and compact design of the main unit makes it convenient to carry. It comes with dedicated software, enabling data management on a computer.
It is possible to measure the moisture content of wood (lumber, beams, boards), building materials (mortar, plaster, concrete), paper, gypsum board, flooring, and more.
With its compact, lightweight, shock-resistant design and belt clip, it is ideal for use on-site.
It is compact, lightweight, and has a shock-resistant structure with a belt clip, making it ideal for use on-site.
The DT-125 can measure the moisture content of wood (lumber, beams, boards), building materials (mortar, plaster, concrete), paper, gypsum board, flooring, and more, all with one device.
This is a professional-grade moisture meter for wood and building materials, featuring a compact, lightweight, shock-resistant design and a belt clip for easy portability.
With the switch change, moisture measurement can be performed on wood (lumber, beams, boards), building materials (mortar, plaster, concrete), paper, gypsum board, flooring, and more.
It is a building material moisture meter that can instantly show high values in areas where water leakage occurs or in high humidity areas compared to dry areas.
By simply placing it on the part that measures the high-frequency ball sensor, it displays values, and you can also use the measurement mode for maximum and minimum values. Additionally, it features a backlight function that allows you to see the values even in dark places.
This is an electric resistance wood moisture meter that is ideal for measuring the moisture content of wood (lumber/beam/plank). It is recommended for moisture management and research of wood.
- It is easy to measure the moisture content of wood with a 2-pin electrode sensor. - The measurement speed is fast, and the measured values are displayed instantly on a large screen. It can measure in the range of 9%-30%, and it is equipped with automatic maximum and minimum value recording functions as well as a moisture value hold function. - Measurement data can be transferred to a computer via the RS232C interface (optional).
It is a high-frequency capacitive wood and building material moisture meter that allows measurement without damaging the measured object simply by placing the MC-500 main unit on it.
Measurement range: Wood: 0 - 30%. The MC-500 is a professional digital moisture meter capable of measuring moisture in wood (lumber, beams, boards) and building materials (concrete, mortar, plaster, bricks, gypsum board, flooring, etc.) all in one device.
This is a wood and building material moisture meter that can measure the moisture content of wood and building materials, as well as the relative humidity of building materials, in the range of 0 to 98% RH.
The MC-160SA can measure average moisture content up to a depth of 50mm. It can also measure moisture content divided into six types of wood groups and five types of building material groups, allowing for highly accurate moisture measurement. The measurement range is very broad, accommodating wood: 0-85% and building materials: 0-16%. The MC-160SA features both continuous measurement mode and single measurement mode, and it is a multifunctional device with the capability to display the average of up to 32 measurement data points.
